Posted  by  admin

Fence Paint Brush Amazon

Give a drab or dingy wooden fence a fresh face with a lustrous and long-lasting stained finish.


Whether your wooden fence is years old or newly installed, it can benefit from a single inexpensive addition: stain. Applying wood stain to the slats improves its design and prolongs the lifespan of your hard-working outdoor structure—a win-win!

Unlike some other fence stains with more limited optimal application conditions, you can apply Behr Solid Color Waterproofing Wood Stain in temperatures as low as 35 degrees and up to 90 degrees Fahrenheit, with no adverse effects. This is an acrylic-based fence stain, so it’s simple to clean brushes, buckets, and more with soap and water. Apply the stain in two- to three-foot sections of the fence at a time, taking care to back-brush, or re-paint over uncovered areas left by the previous stroke, with a wide brush. This was purchased to paint 22 standard sized fence panels. The paint brush certainly made light work of painting these fences. I used a quality 5 year fence paint in conjunction with this brush. The paint soaked up well on the brush with limited streaking, there was some bristle loss but nothing major. Pressure Washing. Start with making sure your surface is completely free of dust, dirt, and debris.

For long-lasting, professional-quality results, work with a semitransparent oil-based stain designed for the exterior. These stains elegantly accentuate the natural patina of the underlying wood with a subtle tint, and, as a bonus, boast formulas that slow the growth of mildew and rot as well as protect the wood from ultraviolet light exposure.

With basic cleaning supplies and this straightforward tutorial on how to stain a fence, you can refresh your wooden privacy wall in as little time as a weekend—and reap these benefits right away.

How to Stain a Fence

STEP 1: Choose the right day (or days) for your project.

Before staining a wood fence, scan the weekly weather forecast and select a day with temperatures between 50 and 80 degrees, low to moderate humidity, and no precipitation expected for the next 24 hours. If you’re discouraged by the prospects, remember that “good things come to those who wait”. Extreme cold or moisture can prolong the drying time of wood stain, while the opposite extreme can dry out stain too quickly and leave behind unwanted lap marks on the fence.

STEP 2: Prepare the wood for painting.

Depending on the current condition of your fence, you may need to strip or sand the surface.

Fence Paint Brush Amazon

Starting with a previously stained or finished fence?

Apply wood stain or finish stripper to the slats according to the manufacturer’s instructions, then scrub the slats with a stiff-bristle brush to loosen the old varnish and slough off upright wood fibers.

Learning how to stain a fence that is new?

Ensure the stain will penetrate the wood with the water test: Lightly spray a small section of the fence with a garden hose. If water beads form on the slats, lightly sand the slats in the direction of the wood grain. Water successfully penetrating the slats, though, indicates that your wooden fence can readily absorb the stain.

STEP 3: Clean the fence thoroughly and let dry.

Best Paint Brush

Clean the fence with water from a high-pressure spray nozzle attached to a garden hose (or use a power washer). This will remove light to moderate dirt accumulations and complete the job of the wood stain stripper in blasting away any old varnish from the fence, if applicable. If using a power washer, opt for a low-powered unit operating at no more than 2,000 psi so as not to weather the wood slats. Make sure to let the wood dry out completely before continuing.

Receive free, no-commitment estimates from pro painters near you.

Paint Brush Drawing

STEP 4: Spot-treat mold or mildew with diluted bleach.

If you spot mold or mildew deposits on the fence, prepare a solution of bleach diluted with water in a bucket. Donning rubber gloves, apply the bleach to the slats with a garden sprayer, allowing it to settle into the slats for a few minutes before rinsing the fence clean with a high-pressure spray nozzle or power washer. Again, make sure to let the wood dry out completely before continuing.

STEP 5: Use wood filler to patch imperfections in the fence slats.

Repair chips, gouges, or cracks in the fence with wood filler. If needed, replace damaged slats.


STEP 7: Protect nearby plants and parts of the fence not to be stained.

Use painter’s tape to protect areas of the fence you do not want to stain. Similarly, protect surrounding vegetation at the foot of the fence by covering it with drop cloths.

Fence Paint Brush Amazon

STEP 8: Proceed to applying stain to the fence slats.

Enlist a brush, roller, or sprayer to stain the slats.

  • A natural-bristle brush is the best way to encourage oil-based
    wood stain to permeate wooden fence slats. Dip the tip of the brush into a can of stain, then coat any horizontal slats of the fence from left to right. Afterwards, work your way from top to bottom down the entire length of each vertical slat, maintaining a wet tip at all times. Stain one to two slats at a time to prevent lap marks from forming. One you reach the bottom of a slat, stain the end grain.
  • If using a roller, opt for a medium nap roller cover, then fully saturate the nap with the stain. Apply the stain in two- to three-foot sections of the fence at a time, taking care to back-brush, or re-paint over uncovered areas left by the previous stroke, with a wide brush. This will allow the stain to enter hard-to- reach grooves and recesses, and ensure an even coat free of lap marks.
  • If using a sprayer, follow the same approach as for how to stain a fence with a roller, but stand back a comfortable distance from the fence to apply color.

STEP 9: Let the stain dry, then apply additional coats as desired.

When the entire fence has been stained, let it dry according to the stain manufacturer’s instructions. Apply additional coats of stain as needed to achieve the desired depth of color. A single coat should be sufficient for a new wood fence or one that you also plan to seal.

Paint Brush Images

STEP 10: Finish the job with a coat of sealer.

While a good quality stain alone is sufficient to protect your fence from everyday wear-and-tear, applying a durable sealant over the stain can prolong the finish—and the life of your fence. For best results, apply a single coat of clear, weatherproof sealant by brush, roller, or sprayer. Quickly back-brush unsealed grooves and recesses with a wide brush to achieve a uniform appearance. Allow the sealant to dry completely.

STEP 11: Clean up!

Artist Paint Brushes At Amazon

Dispose of soiled drop cloths, remove the painter’s tape from the slats, and reveal your like-new fence!

Fence Paint Brush Amazon

Go ahead and take the next couple of summers off—you earned it. Only note that while semitransparent stains can last anywhere between two to five years, extreme temperatures and precipitation can prematurely age the finish. Don’t rest on your laurels too long and risk the weather damage: Aim to stain your fence every two to three years to preserve its sheen and weather protective qualities.

Receive free, no-commitment estimates from pro painters near you.

Time-saving products that don’t sacrifice quality are always a boon, and The ONE paint is just that. It mixes a paint and a primer into one labor- and cost-saving bucket. This quick-drying, high-quality paint is designed for use on a range of surface types, so you can use it on wood, metal, plastic, UPVC, brick, masonry, stone, glass, and more.

Thick and opaque, one coat gives a fence or a wall enough coverage to protect it from the elements and look good. It’s a water-based acrylic, so cleanup is easy, and it has a low-VOC formula that’s safe for the environment and your health. It comes in satin, matte, and gloss finishes and a range of neutral colors.