Posted  by  admin

Best Paint Brush For Cutting In Walls

Painting contractor Mark O'Lalor shares some time-saving painting tips or using a paintbrush. (See below for tools.)SUBSCRIBE to This Old House: http://bit.l. Accubrush MX Paint Edger 11 Piece Jumbo kit: The first of our best paint edging tools to feature on. HomeRight Quick Painter C800771 Painting Edge Painter, Cutting In Edges, Painting Wall Edges for Home Interior, Paint a Room Quick and Easy 3.6 out of 5 stars 1,720 $13.23.

While a fresh coat of color can quickly update any room, the crisp lines where your walls meet trim or ceiling are really what set apart a stand-out paint job. Read on for how to achieve such a professional touch on your next project.

Photo: fotosearch.com

Any professional painter knows that a successful paint job is only as good as the preparation that comes before it. That’s why it’s so important to cut in around trim, ceilings, and baseboards before you start rolling paint on the walls. Lucky for us, even the average DIYer can do this well with the right equipment, a little instruction, and some careful application of paint.

Chisel Trim Brush - slanted bristles produce a good, straight line for trimming in corners and edges. Square Trim Brush - the ends of the bristles are cut square and used primarily for applying paint over flat areas. Angled Brush - bristles are cut to make it easier to apply paint to window trim. Thin Angle Sash - slanted bristles and a thin profile produce a good, straight line for trimming in corners.

Photo: fotosearch.com

Step 1

Even when you’re dealing with the small amount of paint required for cutting in, drips and spills can happen. So, begin by prepping the room, making sure that floors and other surfaces are protected. Always use a drop cloth, and move it as you work through the room. Use painter’s tape to mask only those awkward or tough-to-reach spots where you know you won’t be able to guarantee clean results without taping. Otherwise, avoid taping—it takes extra time, and unless the tape is properly applied, paint can seep underneath it or dry on top of it, creating a real mess upon removal.

Step 2

Get ready to paint by loading the brush. Pour about 2 inches of paint into the bucket. Hold your brush with a pencil grip, with the longer side of the brush bristles in line with your pointer finger. Dip the brush into the paint, but be careful not to load more than 2/3 the length of the bristles with paint. Gently tap the brush against the side of the bucket to remove any excess.

Step 3

Now it’s time to get some paint on that wall! Begin about an inch away from the area you’re cutting in, whether you’re working along the trim or down a corner. Holding the brush horizontal with respect to the floor and ceiling, paint a roughly 12-inch stripe on the wall, using a downward stroke if you’re painting at a corner, or a sideways stroke if you’re working along the ceiling, baseboard, or other trim. Now that you’ve used up some of the paint on your brush, turn your brush 90 degrees so that it angles into the wall, and go back to the beginning of your stroke. This time, using long, even strokes, cut in a thinner line of paint that gets right up to the trim or wall corner.

Step 4

Once you’re satisfied that you have a cleanly painted edge or corner, again turn your paintbrush horizontal to the floor and ceiling, and gently sweep back over the area to erase brush marks and feather the outer boundaries of the painted area. Doing so will ensure a smooth, seamless finish after you’ve rolled the walls.

Continue to work your way around the room, gently overlapping sections to keep a wet edge. If you have an accidental drip or get paint on the trim or baseboard, wrap a damp cloth around a spackling knife or the long edge of a 5-in-1 painter’s tool, then run it along your paint line to remove any excess.

Cutting in does take practice, but taking the time to cut in neatly will make a huge difference in the appearance of your newly painted room.

Brush

TIPS FOR SUCCESS

  • Use a light touch. Applying too much pressure on your strokes will cause the paint to ooze out of your brush and drip.
  • Don’t load the brush with too much paint. This will result in drips and heavy lines on the walls, and you’ll risk getting the bristles of your brush caked with dried, crusty paint.
  • Use a high-quality brush. It’s well worth investing in a high-quality cutting in paintbrush. The better the brush, the less taping you’ll need to do, making the job go more quickly and with less frustration.

The best brush for cutting in

The cutting in brushes are essential to handle the painting task of going around the edges of the wall, ceiling, floor edges and cabinets etc. People usually have different color schemes in their room where the paint shade changes around the edges. Even the professionals who have good brush control with their hands couldn’t do justice with the job if they are holding the wrong paint brush in hand. There are different paint brush types available in the market but all are not suitable for cutting in paint jobs. Sure, all of them “can” cut in, but…

You want to paint faster, smoother and better, right ? The cutting in brush ideally is smaller in size with stiff bristles that doesn’t deviate much from the target area and doesn’t create an unsightly boundary or edge.

Finding the suitable paint brush for cutting in job:

Best Paint Brush For Cutting In Walls Interior

The users also have the option of using the masking tape but it often isn’t suitable and feasible in a current setting. The masking tape option can take a lot of time and the results may not that impressiveas that you would have liked. The best paint brush for cutting in demands just a bit of practice and then you will be on your way. Initially it will be a time consuming job particularly because of the limited size of the brush but as you go on with the plan, your hand will become steadier around the edges and your speed will improve. It will only become easier or possible by using a top quality bush which is well made and ideally manufactured to do the painting job around the edges- the “cutting in ” that looks so sharp and tidy.

The paint brush selection really is the key for producing desirable results around the boundaries. The most expensive paint that is available on the planet wouldn’t look good at all if a low quality and inappropriate paint brush is used for applying it. The best paint brush reviews for the purpose of cutting in shows that the appropriate option for the job is the one which is a premium medium size brush. They brush ideally should have a 2 to 2 ½ inch width, and hold a good enough angle to apply a balanced filmof paint on the edges in a more controlled and speedier way. This type of tool demands practice after which you can master the art around the edges. The best paint brush brand for this specific job will tell you about the best ways of using the tool and how to get thenoughenoughe maximum productivity out of it.

Best Brush For Latex Paint

Best Paint Brush For Cutting In Walls

Best Paint Brush For Cutting In Walls

Useful tips for using the cut in paint brush:

Best Paint Brush For Cutting In Walls Color

The following are some useful tips for applying paint when using the cut in brush:

Best Paint Brush For Cutting In Walls

  • You need to have ample amount of light while working on the edges.
  • Don’t think about applying too much paint. A smooth kind of an even coat would give the best look.
  • A dip and touch methodological approach should be used when dealing with any kind of cutting in paint tasks.
  • There are a few paint color types which wouldn’t cover up with a single coat. Cutting in and then rolling for a second coat is desirable.